Products
5050 patch LED colorful light emitting diode (10) -A51107
product detail
KY-016
Product Introduction
-
PCB color: black
-
Use 5mm full color super bright LED
-
With current limiting resistor to prevent burnout LED
-
Can be connected to a variety of microcontroller
-
High level LED
-
Working voltage: 3.3V/5V
-
Size: 16.2mm*15.2mm*1.6mm
Pin Description
-
R: red positive
-
G: green positive
-
B: blue positive
-
GND: common negative
RGB Module
Product description:
Onboard 5050 full-color RGB high-brightness LED lamp beads, 3-way current-limiting resistor to prevent burning out the LED, the RGB pins have been led out and can be directly connected to the microcontroller.
Product parameters:
Working voltage: 3.3V-5V
Instructions for use:
Connect R, G, and B pins to 3.3-5V voltage. Connect to GND to emit single-color or multi-color light.
LC-RGB Module
Product description:
Onboard 5050 full-color RGB high-brightness LED lamp beads, 3-way current-limiting resistor to prevent burning out the LED, the RGB pins have been led out and can be directly connected to the microcontroller.
Product parameters:
Working voltage: 3.3V-5V
Size:14.8*12mm
KY-009
Description:
1. Using 5050 full color LED.
2. RGB tricolor current-limiting resistance to prevent burn out.
3. Through the PWM adjusting three primary colors can be mixed to obtain different colors.
4. With a variety of single-chip interface.
5. Working Voltage: 5V.
6. LED Drive Mode: Common cathode driver.