Analog adder module two-way adder analog addition operation in-phase addition addition module 1:1 adder -79448.
product detail
Parameters:
Module type；analog adder；Single power supply
Module power supply；5--10V；Single power supply
Module bandwidth；1MHz；1.7MHz(3dB)
Quiescent current；9V@31mA
Input impedance；100K
Maximum input signal；±10V
Maximum output signal；±10V
Addition precision；0.5%
Output gain；OUT=IN1+IN2；No gain
Module protection；Power supply reverse connection protection
Features of modules；various；Single power supply can be connected with bipolar signals.
Module application；various；Conversion of bipolar signals into unipolar signals, waveform synthesis, etc.
Module weight；13.5g
Module size；56*38*12；Length * width * height (mm)
Working temperature；-25—+75℃
Module interface；3.81-2P*4
Module description:
KW_ADDER-TWA module adopts high-speed JFET input operational amplifier with extremely low input bias voltage; The module has its own power conversion circuit, which can realize negative signal input and output only by single power supply, and the signal is not affected by power supply voltage. Output signals are in the same direction, and OUT=IN1+IN2 is convenient for calculation; The module is small in size, easy to install, excellent in performance and simple to use.
