Battery battery charging control module full power failure DC voltage protection undervoltage power loss protector CD60L -73857

1.Description:

XY-CD60L is a battery charge and discharge controller module. It can be used for DC 6V~60V any one lithium/lead-acid battery.

2.Features:

1>.Multi-function test instrument

2>.Dual mode work

3>.Support charging protection

4>.Support discharge protection

5>.Support set the charging/discharging time

6>.Automatic detection parameters

7>.HD LCD display

8>.Multi-parameter display

9>.Support power saving mode

10>.Supports automatic battery detection

3.Parameters:

1>.Product name: XY-CD60L Lithium Battery Charging/Discharging Controller

2>.Model: XY-CD60L

3>.Work voltage:DC 6V-60V

4>.Work Temperature:-40℃~85℃

5>.Work Humidity:0%~95%RH

6>.Size:46*45*20mm

4.Function:

1>.Module supports 2 working modes: Charging Control IN and Discharging Control OUT.

2>.Charging Control IN: This mode is used for charging control to prevent overcharging.Display symbol IN indicates charging mode.

3>.Discharging Control OUT: This mode is used for battery discharge control to prevent battery over-discharge and delay battery life.Display symbol OUT indicates discharging mode.

4>.Battery voltage percentage: It is value get from battery voltage V, Lower Limit Voltage Value dn and Upper Limit Voltage Value UP. Calculation formula: V/(UP-dn).

5>.Automatic parameter check: Screen will display and flashing ERR if the Lower Limit Voltage Value dn is more than the Upper Limit Voltage Value UP.

5.Charging Control IN Mode:

1>.Input terminal connect DC 6V-60V charger which use for battery.

2>.Output terminal connect 1pcs DC 6V-60V battery. It will display 0.00V and nbE if the battery does not meet the requirements.

3>.Output turn ON and the input charger starts charging the battery if battery voltage is less than the Lower Limit Voltage Value dn.

4>.Output turn OFF and the input charger stops charging the battery if battery voltage is more than the Upper Limit Voltage Value UP.

5>.The symbol IN will flashing when charging.

6>.Support set parameters:

6.1>.Upper Limit Voltage Value UP: Maximum voltage of the battery. Stop charging the battery if it exceeds this value. It is also the overcharge protection voltage value.

6.2>.Lower Limit Voltage Value dn: Battery allowed minimum voltage. Start charging the battery when the battery voltage is lower than this value.

6.3>.Charging Time OP:

6.3.1>.Set battery charging time.