Products
CJMCU-8051 C8051F300 Single Chip Microcomputer (MCU) Microcontroller Development Board Module -73840
product detail
Product introduction:
The C8051F300 | 1/2/314/5 series utilizes Silicon Labs' proprietary CIP-5 1 microcontroller core. The CIP-51 is fully compatible with the MCS-51 "instruction set; the standard 803x / 805x assembler and compiler can be used to develop software. The CIP-5 1 core provides all peripherals included with the standard 8052, including two standard 1 6-bit counter / timer, an enhanced 16-bit counter / timer input with external oscillator, full-duplex UART with extended baud rate configuration, 256 bytes of internal RAM, 128 bytes of Spe-key function register (SFR) address space and one byte wide 110 port.
Product parameters:
Analog peripherals-8-bit ADC (only for 'F300 12). Up to 500 ksps
Up to 8 external inputs
Programmable amplifier gains of 4, 2, 1, and 0.5
VREF from external pin or VDD
Built-in temperature sensor
External conversion start input-comparator
Programmable hysteresis and response time
Configurable as interrupt or reset source
Supply voltage: 2.7 to 5 V
Typical operating current: 6.6 mA @ 25 MHz; 14μA at 32 kHz? Typical stop mode current: 0.1μA
Temperature range: -40 to + 85 ° C
Pin Description:
