DAC8563 digital-to-analog conversion module data acquisition module dual 16-bit DAC adjustable positive and negative 10V voltage reference -79476

Module parameters:

Module model: DAC8563

Module type: digital-to-analog conversion module

Module power supply: DC3V-5V

Module current: 100mA (MAX)

Module communication protocol: SPI serial

Module provides routines: STM32F103RBT6

Routine platform: STM32F103X-M3; KEIL5 version source code

Module output voltage range: ± 10V or 0-10V

DAC resolution digits: 16

Number of output channels: 2 channels independent

Module output interface: SMA; 24-hour salt spray anti-oxidation

Module output signal: voltage; OPA1602 chip output, with a certain driving capacity, within 20mA

Reference voltage: 2.5V; internal 2.5V reference

Voltage settling time: 10uS

DAC output analog bandwidth: 100KHz

Module features: multiple; with output buffer amplifier, ultra-low AC crosstalk, fast settling time

Module application: multiple; programmable voltage source, instrument and control system, sensor excitation, motion process control

Module interface type: SMA signal output and external reference input, DC5.5 power socket

XH2.54 pin data interface.

Module description:

The DAC8563 device is a low-power, voltage output, dual-channel, 16-bit digital-to-analog converter (DAC). The device includes a 2.5V, 4-ppm / ° C internal reference voltage source that provides a full-scale output voltage range of 2.5V or 5V. The initial accuracy of this internal voltage reference is ± 5mV and can supply or sink up to 20 mA at the VREFIN / VREFOUT pin. It has excellent linearity and minimizes the undesirable transient voltage (glitch) between codes. Using a universal three-wire serial interface, its clock frequency is up to 50 MHz. The interface is compatible with standard SPI, QSPI, Microwire and digital signal processor (DSP) interfaces. The DAC8563 device is similarly powered up at the middle scale. These devices have a power-down feature that reduces the current to a typical value of 550 nA at 5 V. Low power consumption, internal reference voltage source and small footprint make these devices ideal for portable battery-powered equipment. Usually used for programmable voltage source, instrument and control system, sensor excitation, motion process control.