Products
Electronic switch NMOS driver module DC low voltage high current switch isolated input -87718
product detail
Features:
High current NMOS tube is used for circuit switching.
The input mode of optical coupling isolation is adopted to protect the safety of the control terminal.
It can be used in low frequency and low voltage and high current situations, such as DC brush motor, heater, etc.
Specifications:
Input voltage: 12~40V
The output current can reach: 10A
The input voltage of the control terminal is 3.3~24V, suitable for single-chip microcomputer or PLC control mode.
It can be used in low frequency and low voltage and high current situations, such as DC brush motor, heater, etc.
Instructions for use:
The left side is connected to the output load, positive up and negative down
Input power supply is connected to the right side, positive up and negative down. The power supply ranges from 12 to 40V.xh2.54 The seat son is connected to the control signal, up negative and down positive. 3.3V to 24V Open. Access the power supply and control signal, when the switch is on, the red LED will glow.
Shipping list:
1 X driver module
