Products
GP2Y0A02YK0F infrared ranging detection/laser ranging sensor obstacle avoidance ranging 20-150cm -68656
product detail
GP2Y0A02YK0F 2Y0A02 Infrared Proximity Sensor detect Avoidance Detect 20-150cm Distance Long Range With Cable DIY Kit
Product Introduction
- GP2Y0A02YK0F is a distance measurement sensor module.
- It consists of three parts: PSD (position sensitive detector) and IRED (infrared emitting diode) and signal processing circuit. Due to the triangulation method, the material of the measured object, the ambient temperature and the measurement time do not affect the measurement accuracy of the sensor. The sensor output voltage value corresponds to the detected distance. By measuring the voltage value, the distance of the detected object can be obtained, so this sensor can be used for distance measurement, obstacle avoidance and the like.
Technical Parameters
- Supply voltage: 4.5 to 5.5 V
- Power consumption: nominal 33 mA
- Packing size: 29.5 × 13 × 21.6 mm
- Distance measurement range: 20 to 150 cm
- Signal output type: voltage analog signal
- Based on the principle of triangulation
- Output is inversely proportional to distance
- Analog output, requires microcontroller control with AD converter
- The higher the AD number, the more accurate the distance measurement effect, and the 10-bit AD can reach 0.1cm.
- SD card insertion detection and write protection detection ports are all pulled out for convenient function expansion
-
On Jul 27, 2023 at 07:27:09 PDT, seller added the following information: