GY-25T 6DOF six-axis serial I2C gyroscope acceleration angle tilt sensor module -80960
product detail
Model: GY-25T
Power supply: 3-5v (internal low dropout voltage regulator)
Communication method: serial communication (baud rate 2400-230400), IIC communication (within 400K)
Module size: 15.3mm*11.6mm
Pin spacing 2.54mm, 2 rows of pin spacing 12.7mm
The semi-hole plate immersion gold process can be directly mounted on the circuit board.
Direct output Euler angle: YAW ROLL PITCH
Heading angle (YAW) ±180°
Roll angle (ROLL) ±180°
Pitch angle (PITCH) ±90°+±90°
Angular resolution 0.01°
Direct data output via serial port: gyroscope raw data, acceleration raw data, temperature data, Euler angle data.
I2C output: gyroscope raw data, acceleration raw data, temperature data, Euler angle data.
The I2C device address can be modified so that multiple sensors can be hung on the bus at the same time.
The serial port can set the tilt switch alarm value, and the pin outputs high and low levels.
The module can output the angle between the sensor module surface and the horizontal plane, the absolute angle between the surface and the surface, without considering the direction.
