Infrared carbon dioxide sensor MH-Z19B air quality monitoring/CO2 concentration detection sensor module with pins -72338
product detail
MH-Z19E MH-Z19D, the specifications are the same, the model name is changed by the factory.
MH-Z19B carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose smart small-scale sensor that uses non-dispersive infrared (NDIR) principle to detect the presence of CO2 in the air, with good selectivity and anaerobic Gas dependence, long life and other characteristics; built-in temperature compensation; at the same time with serial output, analog output and PWM output, easy to use. The sensor is a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
Parameters:
-
Product model number: MH-Z19B
-
Gas Detection: Carbon Dioxide
-
Supply voltage: 4.5~5.5V DC
-
Average current: <20mA (@5V power supply)
-
Peak current: 150 mA (@5V supply)
-
Interface level: 3.3V (5V compatible)
-
Measurement range: 0~10000ppm can be selected within the range
-
Warm-up time: 3min
-
Response time: T90<120s
-
Working temperature: 0～50°C
-
Operating Humidity: 0 to 95% RH (non-condensing)
Characteristics:
-
Gas chamber with gold plating, waterproof and corrosion resistant
-
High sensitivity, low power consumption
-
Excellent stability
-
Temperature compensation, excellent linear output
-
Provides serial (UART), analog (DAC), PWM waveform output methods
-
long lasting
-
Water vapor interference, not poisoning
Application:
-
HVAC refrigeration equipment
-
Air quality monitoring equipment
-
Fresh air system
-
Air purification equipment
-
Smart home
-
SCHOOL
Vin: Power Positive (Vin)
GND: Negative Power Supply (GND)
Vo: Analog output
PWM: PWM
HD: HD (zero for school, low for more than 7 seconds)
Rx: UART(RXD) TTL Level Data Input
Tx: UART (TXD) TTL level data output
Pin 1: Analog Output Vo
Pin 2: None
Pin 3: Negative Power Supply (GND)
Pin 4: Positive Power Supply (Vin)
Pin 5: UART(RXD) TTL Level Data Input
Pin 6: UART (TXD) TTL Level Data Output
Pin 7: None