PAJ7620U2 gesture recognition sensor module built-in 9 kinds of gesture recognition/IIC interface/intelligent recognition -66414
product detail
Introduction:
This is a gesture recognition sensor based on PAJ7620U2. It can recognize 9 different gestures including up, down, left, right, front, back, clockwise, counterclockwise, and swing.
The gesture recognition module uses the I2C interface and it use the corresponding Arduino library function to program and control. The signal returned by the gesture recognition module can be used as a control signal received by the robot to implement the control of the robot. The built-in recognition algorithm is smart enough to free your hands from the hard keys.
-
Detection chip: PAJ7620U2
-
Operating voltage: 3.3~5V
-
Communication Protocol: I2C Interface Communication Protocol
-
Detection distance: 50mm~100mm
-
Module size: 19.7mm*15mm
-
Induction action: up, down, left, right, front, back, clockwise, counterclockwise
-
GND: negative input of power
-
VCC: positive power input port, can access 3.3 ~ 5V voltage
-
SCL: I2C clock port
-
SDA: I2C data port
-
INT: Interrupt output
