Power module 1500W upgrade 1800W 30A high current DC-DC DC constant voltage constant current boost -75505

Product selling points:
1. Use high-quality materials with guaranteed quality
2. Fan blade type heat dissipation is adopted, with excellent heat dissipation effect and higher output power
3. The temperature controlled fan adopts the hydraulic bearing fan, which achieves a good balance in terms of noise and heat dissipation. The fan does not turn when the load is light. When the load temperature reaches about 60 degrees, the fan automatically turns. It can effectively reduce noise and prolong service life
4. The insulation board of the main power tube is made of high-quality aluminum oxide, and the thermal conductivity is 10 times that of the ordinary insulation pad
5. Oversized silicon iron aluminum magnetic ring adopts four 1.2 pure copper enamelled wires, with low heat and high efficiency
6. It has constant current function, and can be used for car battery boosting, battery charging, etc

Parameters:
Operating characteristics:
Output power: 1800W
Input voltage range: 10V-60V
Output voltage range: 12V-90V
Input current: 40A
Output current: 22A
Conversion efficiency: 48V to 60V 8A (98.1%)
48V to 72V 8A (98.1%)
48V 84V 8A (97.6%)
Charging regulation: 10% to 50% charging (72V output)
Temperature coefficient: 50% load
Ripple and noise: 20MHz bandwidth (48V-72V 4A) 100mVp-p
Switching frequency: VIN=48V VO=72V 4A (110khz)
No load current: VIN=48V VO=72V (18mA)
Input reverse protection: Yes
Storage humidity: 95%
Operating temperature: - 20 65 ° C
Storage temperature: - 40 125 ° C
Temperature rise during operation: 48V to 60V 5A (45 ° C)
Overheating protection: 60 ° C
Wiring mode: input and output (solderless, terminal block).
Heat dissipation mode: strong air cooling appearance

Package Included:

1* Boost converter