TC64 Fast Charge PD Detection Type-C Voltage Ammeter Capacity Temperature Measurement Tester -70940
product detail
TC64 USB Voltmeter ammeter voltage current meter multimeter battery PD charge power bank Type-C color LCD USB Tester
The product current only flow from male connector to female connector (one-way current), the reverse is still energized but the current is shown to be 0. Pay attention when using.

Type-C Full-Color LCD Display Tester
-Model : TC64
Technical Parameter:
Product Model:TC64 Display screen:0.96 Inch color LCD display
Voltage measurement range:3.70-30.00V Voltage measurement resolution:0.01V
Current measurement range:0-4.000A Current measurement resolution:0.001A
Capacity accumulation rannge:0-99999mAh Voltage measurement accuracy:±(0.8%+4digits at 25℃)
Energy sccumulation range:0-99999mWh 999.99Wh Current measurement accuracy: ±(1%+4 digits, at 25℃)
Load impedance range: 1Ω-9999.9Ω Power measurement range:0-120W
Temperature range:-0℃~80℃/32℉~176℉ Temperature measurement error:±3℃/±6℉
Working temperature range: 0~45℃/32℉~113℉ Product size:50mmx19mmx9mm
Refresh rate:2Hz Product weight:7g( With packaging 14g)
Quick charge recognition mode:QC2.0、QC3.0、APPLE 2.4A/2.1A/ 1A/0.5A、Android DCP、SAMSUNG
Note:
1, The product current only flow from male connector to female connector (one-way current), the reverse is still energized but the current is shown to be 0. Pay attention when using.
2, if you use our TC64 meter to connect phone, you must have PD charger , or have many converter cable ..
2, Type-C port is full function port , support Type-C fast charge and most all type-c device , but not Type-c identity resistance (no type-c trigger)
3, Application: PD charger measurement; PD car charger measurement; Type-C U flash measurement, and etc.
Show:
1, User manual: http://www.mediafire.com/folder/1ne1rbus2zxzc/TC64
2. Description video : https://www.youtube.com/watch?v=x1rUT5rOgSA
|
|
TC64 |
TC66(C) |
| USB port |
Type-C port |
Type-C port |
| Expansion port |
None |
Micro-USB |
| Voltage measurement range |
3.70-30.00V |
0-30.0000V |
| Voltage measurement resolution |
0.01V |
0.0001V(0.1mV) |
| Current measurement range |
0-4.000A |
0-5.00000A |
| Current measurement resolution |
0.001A |
0.00001A(0.01mA) |
| Power measurement range |
0-120W |
0-150W |
| measurement method |
current can pass in one direction |
current pass in two direction |
| Identifiable fast charge protocol |
QC2.0、QC3.0 |
|
| Supported fast charge protocol |
None |
QC2.0、QC3.0、Huawei FCP、 |
| Trigger/decoy protocol |
None |
QC2.0、QC3.0、Huawei FCP、 |
| Interface Introduction |
Main Interface |
Main Interface |
| Communication Function |
None |
PC software: work on Win7 or above |
| Special Function |
None |
1. Detect supported/unsupported fast charge protocol |













Function Interface:


Measurement Main Interface Quick Charge Recognition Interface
Button Instruction:
The button is located on side of the tester. There are 2 kinds operation way, long press and short press. Short press is to realize switch between Measurement Main Interface and Quick Charge Recognition Interface.

Introduction of Icon Function
1: Screen Off Icon
2: Temperature Unit Switch Icon
3: Data Group Switch Icon
4: Current Data Group Reset Icon
5: Screen Rotation Icon
Operation Instruction:
After power on, welcome interface will be displayed firstly, then main measurement interface will be shown.
Interface 1: Main Measurment Interface.
6:Voltage Measurement Value

