UL2003 five-wire four-phase stepper motor driver board module PH2.0-6pin interface -86506

ULN2003 motor drive module is mainly applicable to 4-phase 5-wire stepping motor, which is commonly used to drive 28YBJ-48 28BYJ48 deceleration stepping motor. PH2.0 and XH2.54 interfaces are reserved for the module, which is convenient for wiring.

Parameters:

Working voltage: 5V

Driver chip: original ULN2003 chip

Interface model: PH2.0-6P/XH2.54-5P

Locating hole: M3

Module size: 23 * 38 * 7.8mm (manual measurement error, only for reference)

Pin description:

GND: power supply negative, ground

VCC: positive 5V power supply,

A: Input signal pin IN1

B: input signal pin IN2

C: input signal pin IN3

D: input signal pin IN4

Note:

1. Please use 5V power supply. If the voltage is too high, it is easy to get hot and burn the stepping motor

2. When connecting 28BYJ48 decelerating stepper motor, it is recommended that the power supply should be above 200MA. 28BYJ48 decelerating stepper motor is a small torque motor. Do not drive heavy objects.