Voltage Detection Module Voltage Sensor Voltage Sensor Electronic Building Block -57321

Product Details:

• Voltage Sensor Module

• Condition: New

• This module is based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller.

• Arduino analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V).

• Arduino AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V(5V/1023), so the minimum voltage of input voltage detection module is 0.00489Vx5=0.02445V

• Parameters:
  Voltage input range : DC0-25 V
  Voltage detection range : DC0.02445 V-25 V
  Voltage analog resolution : 0.00489 V
  Output interface : "+ " connected 5/3.3V, "-" connected GND, "s" connected Arduino AD pins
  DC input interface : red terminal positive with VCC, negative with GND

• Reference Code:
  #include
  
  int val11;
  int val2;
  
  void setup()
  {
  pinMode(LED1,OUTPUT);
  Serial.begin(9600);
  Serial.println("Emartee.Com");
  Serial.println("Voltage: ");
  Serial.print("V");
  }
  void loop()
  {
  float temp;
  val11=analogRead(1);
  temp=val11/4.092;
  val11=(int)temp;//
  val2=((val11%100)/10);
  Serial.println(val2);
  delay(1000);

•