Voltage-to-current module converts 0-5V voltage to 0-20mA current -73774
product detail
The voltage to frequency module LC-V2A can convert 0-5V voltage into 0-20mA current signal output, and adjust the current by adjusting the voltage.
Features:
The voltage (0~5V) on the industrial standard is converted to the current (0~10mA, 4~20mA) on the industrial standard.
Driving capacity MAX15MA, linear output
Output signal can be directly connected to AD converter
It can be connected with the microcontroller with AD function.
It is easy to operate and can be fine adjusted through potentiometer.
Technical parameters:
Working voltage of module: DC 10V-30V.
Conversion range: 0-5V voltage to 0-20mA current
Pin description:
VCC: working power supply 10V-30V.
GND: working power supply ground.
VIN: Input voltage 0-5V.
GND: input voltage ground.
OUT: output current 0-20mA.
GND: output ground.
Operating instructions: connect the working voltage to VCC and GND, and do not reverse the connection to avoid damaging the board and components.
Connect the controllable voltage at the VIN end, the range is 0-5V, and there is a corresponding current output at the output end.
The corresponding relationship between voltage and current can be fine tuned and calibrated by adjusting the potentiometer.
